Tealight Burners

Description

Instructions

1. Place your oil burner in a safe, stable situation, away from drafts and anything flammable and also well out of the reach of children or pets.
2. Remove all labels from the melt and place the soy wax melt in the top of a clean, dry oil burner – Do NOT add water. Depending on the size of your oil burner, you may want to place 1-2 melts in the top dish-like section of your burner. Reseal the package to retain the fragrance of the remaining melts.
3. Remove any labels from the tealight. Light the tea light candle in the base of the oil burner, directly below the dish.
4. You will experience the aromatic fragrance throw of choice, once the wax has melted.
5. Extinguish the tea light candle when leaving the room – never leave a burning candle unattended or within reach of children or pets.
6. Once the tealight is extinguished, the melt will harden.
7. Re-use soy wax melts until no fragrance is released. To remove, let it cool and harden then press gently on one end. If it does not slide out easily, cool in the fridge for 10 minutes to shrink the wax.

Take care when using melts of fragrance and be sure to never add water or light the melt directly.

**Safety Tips & Recommendations

• Never burn this candle longer than 3-4hrs
• Do not leave a burning candle unattended.
• Vessel may become hot to touch.
• Keep out of reach of pets and children.
• Do not move a lit candle.
• Ensure candle is on a heat resistant surface.
• Trim wick to 5mm before relighting.
• Do not allow candle to burn to the base of vessel.
• Store in a cool, dry place away from sunlight.
• Failure to follow these instructions could result in fire hazard or injury.